The equipment consists of a body, a loading dock with a compression mechanism and an exhaust device inside the body. The hydraulic installation and control mechanism, all functions and load distribution are conveniently mounted, in accordance with the technical specification of the truck chassis on which they are mounted. All equipment is manufactured in series production taking into account the regulations in force.
Net body volume: 10 - 14 mc;
Loading bin volume: 1.5mc - 2mc
Compression cycle: 25 sec;
Unloading time: 35 — 45 sec;
The degree of compaction: 5:1;
Compression mode: by translation;
To the collector compartment there are continuous welds, in order to avoid the formation of rust. The shape of the collector compartment is such as to provide high rigidity with smooth walls on the outside
Moves inside the body on the profiled itself from the floor to the top;
The exhaust device is easy to replace being made of polyamide clogs assembled by rivets;
The exhaust device is mainly driven by a double-acting telescopic cylinder.
It is located at the rear of the body when it is empty, and moves automatically to the front by means of the pressure valve when waste is loaded into the drain;
The leg is mounted on the body through upper hinges and opens with the help of a double-acting hydraulic cylinder.
It turns automatically when closed. The upper hinges, locking hooks and hydraulic cylinders are mounted on the same axle in order to prevent overload of the rear structure.
A profiled sealing gasket is installed here, in order to prevent leakage of dirty water from the body. The gasket is made of a rubber that is resistant to wear and acids.
The waste from the pit is turned over into the body and then pressed with the help of a mechanism driven by 4 double-acting hydraulic cylinders.
The press plate is thus sized to empty the tub in one pass.
Sabots are very easy to replace from the outside because the self has no stop. The slide also has 4 central studs to keep it securely in the center position.
There is a safety bar at the back of the fairing that is mounted between the body and the leg to keep the door open during repairs.
The superstructure is provided with 2 stages for operators with presence sensors. If the operator steps on the step, the compaction cycle stops to prevent possible accidents.
There are also anti-cading safety valves mounted on the hydraulic cylinders to prevent the drain from falling off in the event of a broken hose.
There is a tap for draining dirty water under the drain.
There are no lubrication points, electrical or hydraulic components inside the collector cap, to avoid difficult or dangerous maintenance operations
24 V electrical system
Electrical connections with plugs for easy maintenance and repair
Sound indication for walking back
Sealing IP65
Safety buttons on both sides of the superstructure.
The pump is mounted on the power socket of the truck gearbox, and the capacity is
so chosen that in 25 - 30 seconds a compression cycle is achieved.
The power outlet is operated from the cabin.
Hydraulic oil tank: 130 liters.
Filter per return
The tank is equipped with a visiting cap, level and temperature indicator and a drain valve.
The closing and opening of the lane, the back-and-forth movement of the discharge device are controlled manually by two directional levers with control valves and mounted in the front - right of the body.
The movement of the slide and the cup is controlled by 3 levers with directional electropneumatic valves mounted at the rear. The loader is manually operated by a lever.
All valves are of higher category.
2 double acting hydraulic cylinders for lifting and turning:
Eurocontainers of 80, 120, 240, 360 L and eurocontainers of 600 — 1100 L;
Emptying cycle for 1.100-litre containers: 25 sec.
Low loading capability for manual loading of bulk or bulky waste
Grease points for lubricating moving parts
Side protectors
Lifting capacity: approx. 1,000 kg.
Loader for garbage containers of 1,100 liters and 240 liters.
Safety bar between body and leg used during repairs.
Lamp at the back for night work.
Two foldable stairs mounted at the rear with operator support bars and sensors
adduce
Rear view camera with in-cab monitor for work area surveillance
Dirty water tank in front of the body.
